Chemical absorptive mat – ultrasonic bonded (80 cm x 50 m)

• Reinforced chemical absorbent mat roll is designed for the rapid capture and clean-up of spills of aggressive liquids, especially acids, alkalis and other hazardous chemicals
• Thanks to its high absorption rate, the absorbent quickly captures spilled liquids directly at the source and helps prevent their further spread across the working area
• The reinforced construction provides increased resistance to abrasion and mechanical wear, making the absorbent suitable for regular use in manufacturing facilities, workshops and chemical storage areas
• High chemical resistance makes it suitable for use with aggressive liquids
• The pink colour makes the chemical absorbent easy to identify and helps distinguish it from universal and oil-only absorbents
• The absorbent mat roll can be easily cut to the required size or shape according to the specific application
• With a width of 80 cm and a length of 50 m, it is also suitable for covering larger working areas where chemical spills or drips may occur regularly
• The absorbed liquids remain securely bound in the absorbent and are not released spontaneously

Main advantages

• Pink colour for easy identification
• Reinforced construction with increased abrasion resistance
• High chemical resistance

Recommended use

• Prevention and clean-up of spills of aggressive liquids
• Absorption of acids, alkalis and chemical solutions
• Covering work areas exposed to frequent chemical drips and spills
• Wiping aggressive liquids from machinery and equipment surfaces
• Protection of work areas when handling hazardous liquids

Procedure for cleaning up a hazardous liquid spill:

1. Wear appropriate personal protective equipment depending on the type and properties of the spilled liquid.
    
2. Cut the absorbent to the required size and shape.
    
3. Place the absorbent on the spilled liquid.
   The liquid is quickly absorbed into the material until the absorbent reaches its full absorption capacity, indicated by a uniform darkening of the material.
    
4. Replace the absorbent when fully saturated or if the material becomes damaged.
   After removing the spilled liquid, place the used sorbent in a suitable container for hazardous waste. 

Dispose of used material in accordance with applicable regulations!

• Technical Data Sheet