Hydrophobic absorptive mat in foil – basic LIGHT, 200 pcs (40 x 50 cm)

• absorb oil substances and oils
• do not absorb water
• float on the surface indefinitely
• strong physical bond between the captured liquid and the sorbent, the captured liquid will not spontaneously release

Procedure for handling an oil spill:

1. Place the material on the oil spill and let it act.
   The liquid is quickly absorbed into the fabric until the sorbent capacity is fully saturated (continuous dark coloring of the fabric).
2. Regenerate saturated mats.
   Remove the saturated mats from the surface, fold, and squeeze them. Regeneration by squeezing allows: minimizing the amount of used sorbents - separating the captured liquid.
3. Replace if fully saturated, or in case of material damage from squeezing.
   Remove the used mats and store them in a prepared container for hazardous substances.

Dispose of the used material in accordance with applicable regulations!

• Technical Data Sheet