Hydrophobic reinforced absorbent mat 30 x 30 cm, 100 pcs

• Hydrophobic absorbent mats in a reinforced design are intended for effective absorption of oil-based substances and oils in both industrial and emergency situations
• Hydrophobic mats absorb oil contamination while repelling water
• Thanks to their hydrophobic treatment, the mats are ideal for use on water surfaces
• They floats on the water surface and absorb only oil - based substances and oils
• A strong physical bond between the absorbed liquid and the absorbent ensures that captured substances do not leak back into the environment
• The reinforced structure increases mechanical durability
• The absorbent mats are suitable for continuous absorption of minor oil leaks in industrial operations
• They can also be used for mechanical wiping of dirt from machinery, equipment, and floor surfaces

Key features

• Hydrophobic absorbent for oils and oil-based substances
• Does not absorb water and floats on the surface
• Reinforced construction with increased abrasion resistance

Recommended use

• Cleanup of oil spills on water surfaces
• Absorption of leaks in industrial facilities
• Oil absorption from solid surfaces and equipment
• Preventive protection of work areas

Procedure for handling an oil spill:

1. Place the material on the oil spill and let it act.
   The liquid is quickly absorbed into the fabric until the sorbent capacity is fully saturated (continuous dark coloring of the fabric).


2. Regenerate saturated mats.
   Remove the saturated mats from the surface, fold, and squeeze them. Regeneration by squeezing allows: minimizing the amount of used sorbents - separating the captured liquid.


3. Replace if fully saturated, or in case of material damage from squeezing.
   Remove the used mats and store them in a prepared container for hazardous substances.

Dispose of the used material in accordance with applicable regulations!

• Technical Data Sheet