Kit for pipe repair 7,5 x 360 cm

• Immediate solution for environmental emergencies involving pipeline leaks and hazardous liquids, an excellent product for permanent repairs
• Suitable for pipes with an outer diameter of up to 75 mm.
• Common repair of holes and cracks in pipes while also providing protection against aggressive environments
• Suitable for use on steel, PVC, aluminum, fiberglass pipes, etc.
• The kit includes sealant, bandage, and gloves
• The repair is completed within 30 minutes
• After curing, the bandage withstands internal pressure up to 1.4 MPa
• Resistant to temperatures up to 80°C

Instructions for Use:

1. Prepare the surface to be repaired by cleaning, degreasing, and roughening it.
2. Put on protective gloves.
3. Knead the two-component sealant between your fingers until it becomes soft and uniform.
4. Apply the two-component sealant to the crack in the pipe.
5. Tear open the bandage packaging and remove the bandage.
6. Submerge the bandage in water for about 30 - 40 seconds.
7. Wrap the bandage tightly around the prepared area.
8. Tighten the bandage and smooth the surface until it hardens.
9. The bandage will adhere perfectly and will harden within approximately 30 minutes after application.

CAUTION!
If the surface being repaired is not dry, press the bandage firmly against the surface and hold it for at least 3 minutes.