Universal loose absorbent ECO-DRY STANDARD 10 kg

• Universal Granular Absorbent ECO-DRY STANDARD 10 kg is a natural mineral absorbent designed for collecting liquid contaminants from solid surfaces
• Its hydrophilic composition of non-calcined moler (diatomite) reliably absorbs oils, petroleum products, and water-based or organic solutions
• Thanks to its low dust formation, handling is safe and convenient
• The absorbent is suitable for a wide range of applications – from industrial halls and workshops to outdoor areas, even in adverse weather conditions
• The material is non-flammable, chemically stable, and odorless
• Ideal for rapid spill response, it minimizes the risk of surface damage and saves time and cleanup costs
• Do not use with hydrofluoric acid (HF) or sodium hydroxide (NaOH)!!!

Key Features

• High sorption capacity
• Low dust – safe for indoor use
• Fast and easy application without special equipment
• Practical and visible packaging

Composition, Parameters, and Basic Properties:
 

• Material: Diatomite
• Moisture content: max 6%
• SiO2 content: min 69%
• Al2O3 content: max 11.8%
• Fe2O3 content: approx. 4.3%
• pH: 5.7–8.3 (depending on batch)
• Grain size: 0.3–0.7 mm
• Bulk density: 0.84 g/cm3
• Physical state: solid
• Color: gray to gray-brown
• Odor: odorless
• Oil absorption capacity: 48% by weight
• Solubility: insoluble in water
• Flammability: non-flammable

Spill Cleanup Procedure:

1. Sprinkle the material onto the contaminated area and let it act for 5 minutes.
   The liquid is quickly absorbed into the granules until the sorbent’s capacity is fully saturated.


2. Speed up absorption by raking or agitating the sorbent with suitable tools (shovel, rake, broom, etc.).


3. Replace the absorbent if fully saturated with the spilled liquid.
   Once saturated, remove the used absorbent with appropriate tools and place it in a prepared hazardous waste container.

Dispose of used material according to applicable regulations!

• Technical Data Sheet